TUNZE OUTLETS

The TUNZE outlets are an ideal solution for pressure less water treatment with surface suction from below the aquarium. About 50 per cent of the surface water  50 per cent of the water at the bottom of the aquarium is removed. The outlets remove only as much water as is pumped into the aquarium. On account of the light-protected construction, they are almost maintenance-free.
The TUNZE outlets are supplied ready for mounting with detailed mounting instructions but without inlet and outlet pipes, . Two outlet systems should be used for aquariums with more than 600 litres. At the outlet side, commercially available outlet pipes can be connected to the pipe sockets. However, in order to keep the noise as low as possible, we recommend outlet hose and fittings 1075/2.For the inlet, we recommend the inlet hose and fittings 1073. The connecting hose for the TUNZE pumps is included.

	1076/2 The Wall outlet 1076/2 is used for installation in aquariums with holes (43 - 45 mm) in the rear or lateral walls. In combination with outlet hose and fittings 1075/2 the outlet can be used up to about 1.500 l/h.
	1077 The central outlet 1077 is used for aquariums which have been drilled in the base. An outlet of about 1.500 l/h
	1074/2 The outlet 1074/2 is ideal if the aquarium has no hole in the glass, it simply hooks over the top of the aquarium spanning the back glass and strengthening braces (no more than 50 mm). After an interruption the recirculation pump starts operating again automatically. In combination with the outlet hose and fittings 1075/2 the outlet can be used up to about 1200 l/h.

Paraquatics Online Shop

Click Here

FOR MORE INFORMATION ABOUT THESE PRODUCTS

E-MAIL           SALES

OR   PHONE    01273 733996