!
!

ACCESSORIES

!
Tunze
0390.040
Weight: g

TUNZE UNION FOR HOSE

Diam. 6 x 9 mm

Tunze
0102.410
Weight: g

TUNZE UNIVERSAL BRACKET

For the attachment of classic style pumps to horizontal pane covers, we recommend the use of the mounting bracket made of high-grade steel in combination with the mounting clamp supplied along with the pump.

Tunze
0104.720
Weight: g

TUNZE SILICON GLUE

For glass & TUNZE suction cups
80 ml

Tunze
0104.740
Weight: g

TUNZE CORAL FIX

Adhesive on an epoxy resin basis for safe attachment of coral on stone. To be used also to stick glass, ceramics, wood, and many plastic materials.
4 oz (113 g)

Tunze
0220.400
Weight: g

TUNZE AQUARIUM TONGS

Combines precise operation, longevity and high closing force. Objects up to a weight of 2.5 kg (5.5 lbs.) can be lifted. The tips of the tongs have been provided with rubber jaws, and thus prevent objects from sliding out.
Length: 600 mm (23.6 inches.). Material: Lexan®. Suitable for use inside and outside of the aquarium.

TUNZE CARE MAGNET NANO 0220.010

Care Magnet

The "Care Magnet" is a breath of fresh air in the field of aquarium pane cleaner design, consisting of an ergonomic handle and special plastic blades made of wear-resistant high performance plastic. The patented slim Care Magnet is significantly more compact than conventional algae magnets with a large cleaning surface, it is unobtrusive and therefore able to remain within the aquarium without disrupting the overall scenery.

Why care?

This window pane cleaner doesn't cause any scratches on internal aquarium panes, glass or acrylic. The inner magnet is more than 3mm away from the aquarium and thus prevents the jamming of the aquarium sand. The two plastic blades remove the algae considerably better from the glass panes than a flat cleaning surface - almost as good as a sharp metal blade. The life of a blade is from several months up to approx. one year. The low flow resistance during the cleaning with a simultaneous high magnetic coupling, makes a separation of the magnet nearly impossible.

The large blade should only be modified with the included stainless steel blade for aquarium glass panes with particularly tough algae, e.g. older deposits on the side walls or thick calcareous algae.

 

The plastic blades are also suitable for acrylic panes.

The Care Magnet can also be used on round aquarium panes or round-arched panes.

 

Glass thickness from 6mm (1/4") to max. 10mm (3/8").

Width 45mm (1.77 in.), length 78mm (3 in.).

Including a replacement plastic blade.

Tunze
0800.010
Weight: g
0800.010

TUNZE REPLACEMENT CARTRIDGE MEDIUM

PACK OF 5 FILTER CARTRIDGES

TUNZE replacement filter cartridges with deep-bed filter action. Perfect preliminary filtration action by absorption on acrylic wadding to be washed 2 to 5 times.
ø 80 x 145 mm

Tunze
1073.000
Weight: g

TUNZE INLET PIPE SET METRIC

Pipe set consisting of 4 pipes ø 25 mm x 1m and 3 sleeves ø 25 mm, 7 angles 90° connecting hose and clamps.
Tunze
1073.030
Weight: g

TUNZE RECIRCULATION MULTI PUMP

* Especially designed recirculation pump 400 to 2,800 l/h -  88 to 615 gph

* Hmax 3 m 118 inches

* 35 to 55 w

* variable pumping capacity

* The water outlet 25 mm can be positioned upwards or to the front

eight suction cups ensure a stable attachment and prevent vibration

* Long life drive with high performance impeller and automatic cleaning

Tunze
1074/2
Weight: g

TUNZE OUTLET WEIR BOX HIGH VERSION

FOR LOWER WATER LEVELS

UPTO 80 MM DOWN

The TUNZE outlets are an ideal solution for pressureless water treatment with surface suction from below the aquarium. Abt. 50 per cent of the surface water and abt. 50 per cent of the water at the bottom of the aquarium is removed. The outlets remove only as much water as is pumped into the aquarium ( MAXIMUM LOAD1,200 ltr ). On account of the light-protected construction, they are almost maintenance-free.
The TUNZE outlets are supplied ready for mounting, without inlet and outlet pipes, with detailed mounting instructions.
Two outlet systems should be used for aquariums with more than 600 litres.
At the outlet side, commercially available outlet pipes can be connected to the pipe sockets. However, in order to keep the noise as low as possible, we recommend outlet hose and fittings 1075/2.
For the inlet, we recommend our inlet hose and fittings 1073. The connecting hose for the pumps of the TUNZE cabinets is already included.

( pipe work needed )

Tunze
1075/2
Weight: g

TUNZE OUTLET PIPE SET

Pipe set consisting of a special outlet hose (2 m) ø 40 mm with clamps and holding devices for the outlet boxes.

Tunze
1076/2
Weight: g

TUNZE WALL OUTLET

The Wall outlet 1076/2 is used for installation in aquariums with boreholes (43 - 45 mm) in the rear or lateral walls. In combination with outlet hose and fittings 1075/2 the outlet can be used up to abt. 1.500 l/h.

( pipe work needed )

Tunze
1077.000
Weight: g

TUNZE CENTRAL OUTLET

The central outlet 1077 is used for aquariums which have been provided with an internal central outlet pipe. An outlet of about 1.500 l/h.

( pipe work needed )

Tunze
1077.100
Weight: g

TUNZE SCREW CONNECTION

For outlet 1077, other water flow with pipe or outlet hose and fitting 1075/2 is possible; consisting of screw connection 40 / 50 mm, 1 ¾” for glass borehole in the bottom approx. 55 mm and upright stand pipe 40 mm. Delivery without operating instructions; use suitable for experienced expert only.

Tunze
3155.000
Weight: g

TUNZE UNIVERSAL OSMOLATER

Now with New Magnetic sensor Holding Device

@ the same great price

Water level regulator with two sensor holding devices, extension and numerous fastening accessories. It is suitable for cabinet filter plants in TUNZE Comline filters or on the edge of the aquarium.
This osmotic regulator can also be used in TUNZE SYSTEM cabinet filter plants. The sensors can be stuck to glass surfaces or can be fitted directly to the edge of the tank.
Delivery condition: Ready for mounting with power supply unit, metering pump, hose, sensor holding device.
Metering pump capacity: 0.9 m: 52 l/h, 1.5 m: 47 l/h, 2 m: 27 l/h, Hmax: 2.2 m

Tunze
3155.600
Weight: g

TUNZE MAGNETIC MOUNTING HOLDER FOR THE 3155 SENSORS

Magnetic holder for the Automatic Osmolator sensors

Tunze
6025.500
Weight: g

TUNZE NANO MAGNETIC HOLDER

Great for holding small pumps, electrodes & heaters etc

" virtually anywhere in the aquarium "

Universal holder for attachment up to a glass thickness of 12 mm

Tunze
6025.510
Weight: g

TUNZE NANO STREAM C-CLIP

Replacement C-clip for 6015

Tunze
7008

TUNZE REEF EXCEL SALT

 Tested By Practical Fishkeeping Magazine - April 2010

Voted - Runner Up - Best Marine Salt

Reef Excel® Lab Marine Salt

Reef Excel® laboratory marine salt is the consistent further development of hw sea salt tested for many decades. In its composition, this sea salt is based on the latest international marine biological findings as well as analyses, and contains traces and bio elements in quantities which are identical to those in natural sea water. In regular intervals, Reef Excel® is examined for constant quality and composition by an independent testing laboratory accredited in keeping with German/European standard DIN EN 45001. Produced and analysed in keeping with the criteria for quality management in conformity with ISO 9000ff, Reef Excel® will dissolve crystal clear and free from residue within a very short period of time.

( 8 & 20KG'S Delivered in a box, Not bucket as Shown )

Great Price !!

Tunze
7092.000
Weight: g

TUNZE WAVE CONTROLLER 7092

The new Wavecontroller 7092 fitted with a membrane keyboard is a control unit for all Turbelle® pumps with electronic motor. It is the perfect synthesis between Singlecontroller 7091 and Wavecontroller 6091, and thus can synchronously or reciprocally control two Turbelle® pumps:
Wave simulation by setting the two pump outputs to maximum and minimum values as well as the pulse time.
Oscillating flow for the direct or reciprocal operation of Nano Wavebox / Wavebox.
Oscillating flow with Turbelle® pump for the operation of Turbelle® stream pumps.
Automatic search of the resonance frequency in case of oscillating flow.
Ramp function for a gentle start of the pumps.
Foodtimer at the touch of a button; after about eight to ten minutes, a restart is carried out automatically.
If the Photo-Electric Cell 7094.050 (not included in the delivery) is attached to the connecting port, the night-mode operation is activated automatically.

Tunze
7095.000
Weight: g

TUNZE MULTI-CONTROLLER 7095

Moonlight Function

* Wave Simulation Function

* Tidal Current Control

* Night mode operation including photoelectronic cell

* Sequential pump Circuit

* Random Flow

* Foodtimer button

* The unit is supplied with four connection cables 7092.30 and photo-electric cell 7094.050 permitting a near-nature current control with up to four Turbelle ® electronic. If two branch adapters 7092.34 are used, up to eight Turbelle® electronic can be connected, operated in pairs.

New functions:-

* Waterproof membrane keypad on new housing

* LED moonlight with 29 day moon phase including universal mount

* Two interval functions for tidal current control with alternating on / off switch function of the pumps or alternating operation of the pumping capacity

* Display of the capacity of the pump connected

Tunze
7096.000
Weight: g

TUNZE MULTICONTROLLER 7096

Programmable Multicontroller for upto 4 pumps with the following funtions :-

* Wave Simulation - with changeable parameters

* Tidal Current Control - with changeable parameters

* Sequential pump Circuit - with changeable parameters

* Random Flow - with changeable parameters

* Foodtimer button - with changeable parameters

* Night mode operation including photoelectronic cell

* LED moonlight with 29 day moon phase including universal mount

* Two interval functions for tidal current control with alternating on / off switch function of the pumps or alternating operation of the pumping capacity

* The unit is supplied with four connection cables 7092.30

* One USB connecting cable.

 

Simply connect to a Laptop or PC with the supplied USB cable, the unit will be instantly recognised and then change the programs from a simple windows based tool.

Vista & Windows XP compatible, Software Disc supplied.

Tunze
6105.500
Weight: g

TUNZE SAFETY CONNECTOR

Tunze Stream pump's can be operated on any direct-current source (battery, solar cells) from 10 V to 24 V. For a safe connection to the pump, we recommend the Turbelle® Safety Connector 6105.50, which contains a 4 amps fuse.

The safety connector permits normal operation with the TUNZE® power supply unit, but in case of a power failure it will automatically switch over to a car battery or a direct-current source.

Ideal for Emergency flow during Power Cuts

For use with :- 6055, 6101,6201 & 6301

Tunze
8555.000
Weight: g

TUNZE RO WATER CONTROLLER

TUNZE® RO Water Controller 8555 is an automatic water level controller used in the pure-water container of TUNZE® RO station. The controller is also suitable for other water tanks or can be connected to an automatic refill system. It consists of a controller, two sensors, a water valve and an 11 V power supply unit. Depending on the demand, the water valve can be replaced by switched socket outlet 3150.11 for mains operation.
If the position of the sensors of the RO water controller is reversed, the switched socket outlet 3150.11 and a pump can be used to empty a water tank, and thus it can also be used for automatic filling or emptying of tanks. By means of a combination of two units, a water changing system can be built.

Tunze
9410.200
Weight: g

TUNZE FILTER BAG

150 µm acrylic wadding fibres, suitable for post-filter -1075.500 & DOC Protein Skimmers

Tunze
1075.500
Weight: g

TUNZE OUTLET FILTER

Mechanical preliminary filter for all cabinet filter tanks, placed directly next to the drain hose of TUNZE® outlet, with removable post-filter 150 µm acrylic wadding fibre.